Cornelius CB1522 Manuale di Installazione Scaricare il pdf (Pagina 25)

IntelliCarb Drop-In Ice Cooled Installation Guide

Removal and Installation of Carbonator

Carbonator Removal

1. Remove ice from bin.

2. Disconnect the power to the unit and to the pump and motor.

3. Shut off the CO

supply that is connected to the Carbonator.

4. Shut off the water supply that is connected to the pump and motor.

5. Remove Cup Rest, Splash Panel, Drip Tray, Sliding Lid and Sanitary Plate.

6. Relieve pressure in the system by flipping the pressure relief valve to the up position on the Carbon-

ator.

7. Remove front cover, back cover and valve body of No. 8 (left side).

8. Remove the plug button on the left side of tower and cover hole with tape (safety).

9. Disconnect the barb fitting for the CO

line on Carbonator.

10. Disconnect the barb fitting on the Carbonator lines to the coldplate tubes.

11. Disconnect probe wire from pump and motor harness.

12. Cut the silicone seal with putty knife around Carbonator a minimum of 1.5” deep and remove.

Relief

Valve

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Nessun commento

Cornelius CB1522 Manuale di Installazione Pagina 25